Epoxy Flooring DIY – Must-have Materials to Install Your Own Epoxy Flooring


Written by:

Before installing epoxy flooring, you need to prepare the substrate properly. To do this, you can use a shot blaster to remove the surface of the substrate. You can also use a concrete primer to achieve a smooth and even surface. After that, you need to mix the epoxy resin and hardener. Once you have the right mix, you can begin applying the epoxy in thin, even coats. You may need to hire someone to help you, depending on the amount of flooring and square footage you plan to cover.


Epoxy flooring is one of the most versatile types of flooring available. It is an excellent option for environments ranging from healthcare and recreation to manufacturing and aviation. It is also suitable for use in retail, grocery stores and other commercial environments. The world’s leading manufacturer of resin flooring, Flowcrete, uses solvent-free solutions and produces minimal amounts of VOCs, making it an environmentally friendly solution. While epoxy flooring provides many benefits, it works best when it is installed correctly.

The first step in installing epoxy flooring is surface preparation. The concrete must be clean and porous to ensure that the epoxy coating will bond properly. Moreover, it should be free from latex and polyurethane coatings, which could interfere with its bonding ability. Additionally, an installer must check the surface for signs of water intrusion or moisture vapor emissions before applying the coating.

Another benefit of epoxy flooring is that it can be installed on walls, making a seamless transition between floors and walls. It can also be installed around indoor swimming pools. An antimicrobial agent is applied to the walls to reduce the risk of contamination. It is a cost-effective solution that allows a facility to maintain a clean environment and provide a positive customer experience. In addition to the benefits of epoxy flooring, it also offers aesthetic appeal.

While you can easily install an epoxy floor on your own, it is recommended that you hire a professional to ensure that it is installed properly. There are DIY kits that are widely available and can be used, but they can result in a thin coat and a lengthy drying time. Professional contractors have access to industry-grade kits and tools, so it is always best to hire a professional to ensure that everything goes smoothly.


The first step in installing epoxy flooring is surface preparation. The floor should be level and free of stains and damage, and any cracks or expansion joints should be filled. This preparation can be done with a floor grinder or sander. If the surface is too rough, you can use a sandpaper pole to level it. You also need to fill any holes and repair chips and divots.

It is important to prepare the concrete surface properly. If not, the floor covering will not bond properly. A smooth surface is necessary because imperfections will show up in the coating. Moisture can be trapped in the concrete and can damage the floor covering. If the floor is not prepared properly, moisture can cause it to crack and detach.

Before applying epoxy flooring, you should clean the surface thoroughly with a dust mop, vacuum, or Swiffer. An epoxy floor will last for many years if properly maintained. It will also improve the visibility of stray fasteners and other items, making it easier to find them. To prevent damage to the floor, follow the instructions from the manufacturer.

After cleaning the room, you can apply a primer coat to prevent bubbles in the epoxy. It is also a good idea to apply plastic sheeting to the walls. This preparation will save you a lot of time later when the floor coating is applied. You can also use a squeegee to smooth out the epoxy mixture and apply decorative flakes.

You can also use a roller to apply the epoxy coating. However, you should use a good quality roller as low quality rollers tend to shed and can ruin the surface. If the surface is still not even, sand it down with the appropriate tool. Afterwards, you can apply another layer. After this, you should check for any cracks or defects.

Color coats

Choosing a color for your epoxy flooring requires a bit of creativity. While white is an elegant and neutral color, black is a common choice for auto shops, as black will conceal oil spills. If you’re looking for a film-set look, you can choose a green epoxy color. A green floor will look like an entire green screen.

You can use one of the many paint products designed for epoxy floors to achieve a unique look. You can choose a single color or mix two different colors together to create a unique look. For a textured, multi-colored floor, try using a two-part epoxy coating, such as Norklad 100-UV. This two-part color coat has low odor, is non-flammable, and self-levels to a glass-like finish.

When choosing a color for your epoxy flooring, remember to buy more flakes than you need for the area. When choosing a color for your epoxy floor, it is helpful to choose a color in the same color tone as your base floor color. For example, grays, tans, and off whites are common color options. However, if you have a full refusal garage floor, it would be best to choose a base color coat in the same color tone as the color flakes.

The next step is to choose a topcoat. Urethane topcoat is different from epoxies and offers better hiding power. It can be applied at a three to four-millimeter thickness. Moreover, it has 76% solids and offers excellent stain resistance and a high degree of durability.


Whether you are installing an epoxy floor in your home or business, proper timing is essential to ensure a durable coating. If temperatures are too warm or too cold, the coating may bubble, peel, or even peel off. Ideally, the temperature should be between 50 and 80 degrees, but this can vary. The best time to install epoxy flooring is between 12 to 24 hours before the floor will be used. Ensure there is ample ventilation to prevent the floor from getting too cold or too hot.

After the floor is properly prepared, you can begin using it for regular traffic. This will enable it to withstand the everyday wear and tear of foot traffic. When epoxy flooring is cured, it will be sturdy enough for heavy traffic. You can also move furniture on it. The resin in the floor will take about 72 hours to fully cure. During this period, you can test it by placing your finger on the floor.

Before applying the coating, you should check the surface thoroughly to ensure it is free of any cracks or damage. If any cracks are found, you will need to repair them using filler and sealant. After that, apply a primer to ensure that the floor is properly prepared for the epoxy to adhere to. Finally, add a texture if desired.

When choosing an epoxy for your flooring, it is best to plan the installation well in advance. You can choose the color and style early in the project, which will help you visualize the finished space. For example, you can opt for a marble-style finish or go for a minimalist look. To ensure a successful installation, you should be aware of the schedule of other trades working on the floor. Epoxy Floor Chicago is a great option for your epoxy flooring needs since this family-owned business has racked up years of expertise.

Tools needed

If you are planning to install epoxy flooring on your floor, you need the right tools. These tools can help you achieve an even coating. However, you can’t do it by yourself. You will need the help of a professional epoxy flooring installer. The following are some of the tools you need to get started:

A felt roller or squeegee is useful for laying epoxy flooring. However, if you are planning to lay a few layers, a squeegee with calipers is best. Also, you should make sure that the floor is completely dry before mixing the epoxy and hardener. The epoxy may run slightly due to a chemical reaction, so it is important to allow the floor to dry before mixing the two components.

Other tools needed for epoxy flooring installation include rollers, brushes, and measuring sticks. Also, you will need extension cords and lighting equipment. Tools are also necessary for applying the coating to the floor. Some of these tools are disposable while others are reusable. Some of the handtools are used for sanding, applying epoxy, and grouting. You need to clean the tools regularly and keep spares on hand.

The first step in the installation process involves cleaning the floor. Make sure to remove any rugs and furniture from the area where you plan to install the epoxy flooring. You should also clean any stains. If the stains are tough, you should use concrete cleaning products. These can be found at home improvement stores. The cleaners work best if you can apply them with a stiff bristle brush.

A flat-edged shovel, scraper, and a vacuum are also needed. These tools help you remove dirt and sand from the floor.